S
P
P
Programming Mode . . .
1. At the same time, press and hold
then press TALK.
•
‘F1=LK01’ shows in the display and the
F1 LED flashes red.
2. Press MUTE to select the function/line key
to program.
•
LK01 - LK04 and Off-Hook Ring.
3. Press R/VOL repeatedly to scroll options
for each line key.
•
LK01 - LK16. Use the Aspire program-
ming to define keys for any feature use.
4. Press TALK to exit programming mode.
•
When initially installed, the 4 function
keys default to line keys 1-4 respectively
and off-hook ringing defaults to ON.
Programming the Redial Key to Activate the
Cordless Phone . . .
This option can only be used on the Cordless II.
1. Make sure the Base Unit is in DESK mode.
If the DESK LED is not lit, press DESK
button on the Base Unit.
2. Remove the battery.
3. Press and hold
on the handset at
the same time.
4. Install the battery while pressing these keys.
5. After the handset beeps, release the keys.
The phone is now in the setup mode.
6. Press HOLD to display the current mode.
The display shows ID 0BD1 DIGITAL (REDIAL).
7. Press F2 + HOLD.
The display shows DIGITIAL (F8).
8. Press TALK to restore the phone to standby
mode.
•
Restore the Redial function by entering
setup mode, pressing F3 and then HOLD.
Program the Cordless
II Phone’s REDIAL key
to switch from the
Aspire phone to the
Cordless
(this key cannot be used
to switch from the
Cordless phone to the
Aspire phone)
:
Define the four
function keys on the
phone (additional key
setup can also be
done in the system
programming):
Setting Up the Phone
ayout
ey
Key
(REDIAL)
OR
hing Key
ange)
0893408_rev1.QXD 6/5/03 8:41 AM Page 2
