NEC ASPILA EX, Feature Manual

Page: 916 / 1098

Program 44 : ARS/F-Route Setup
44-02 : Dial Analysis Table for ARS/F-Route Access
910 Programming Aspila EX Software Manual
44-02 : Dial Analysis Table for ARS/F-Route Access
Description
Use Program 44-02 : Dial Analysis Table for ARS/F-Route Access to set the Pre-Transaction
Table for selecting ARS/F-Route.
• Service Type 1 (Extension number)
The number goes to an extension after deleting the front digit(
p
).
Additional data
Assign the digit(
p
) to be deleted on top of the number for extension number usage. There
must be at least one digit deleted.
• Service Type 2 (ARS/F-Route select)
The number is controlled by ARS/F-Route table.
Additional data
Assign the ARS/F-Route table number for Program 44-05. (If the ARS/F-Route Time sched-
ule is not used.) Assign the ARS/F-Route selection number for Program 44-04. (If the ARS/
F-Route Time schedule is used.)
• Service Type 3 (Dial Extension Analyze Table select)
The total length of the number exceeds more than 5 digits.
Additional data
Assign the referring Dial Extension Analyze Table number for Program 44-03.
Input Data
Level:
Aspila EX
IN • Available.
Dial Analysis Table Number 1-120
Item No. Item Input Data Default
01 Dial Up to 8 digits No setting
02 Service Type 0- No setting
1- Select extension call
2- Select “ARS/F-Route Table”
3- Select “Dial Extension Analyze Table”
0