9
Controls
–continued
(AccuSync 700M)
Microphone Operation
Using this jack reduces the length of cable needed to reach the PC's sound card. In order to use
the MIC jack, use a cable (supplied) to plug into the rear of the monitor (MIC OUT) and into the
MIC input jack of your sound card (if available).
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the
connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC
sound card has only Speaker Out, reduce the PC volume. .
NOTE: If the Audio Out of the PC sound card supports both Speaker Out and Line Out,
convert to Line Out using the card jumper of the program (Refer to the Sound Card
Manual).
Side Jacks
Headphone Jack
Automatically mutes the speaker volume
when the headphones are plugged in.
Microphone Jack
Can be used instead of the built-in micro-
phone.
Rear Panel Jacks
MIC.
OUT
AUDIO
IN
Mic Out
- Pink
Connects to the microphone jack of the
PC sound card.
Audio In
-Sky Blue
Connects to the *LINE OUT jack of the
PC sound card.
AS500700700M900FINAL2.p65
10/24/03, 10:13 AM
9
