English - 76
Setup
Setup
OSD Settings
Language
Select the language used in the OSD.
Transparency
Set the transparency level of the OSD menu between 30%, 50%, 70% and Off.
The higher the percentage, the more transparent is the OSD menu.
Information OSD
Displays or hides the Information OSD.
Information OSD contains the messages that are displayed on the screen when the input is
switched or when the state of the input signal changes.
Power save settings
Energy Mode
Select a mode between Home, Retail, and Office.
For more information, see “Energy Mode”
Power Save
Sets the time until the monitor enters the Power Save mode. When the set time has elapsed
after the input signal has been lost, the Power Save function is activated.
Quick Start
When set to [On], the monitor consumes more power but the display recovery time is
shortened when a video signal is input.
Auto Power Down
When turned On, the monitor turns automatically off after 4 hours without any operation.
Auto Input Change
When there are several inputs, this function switches automatically to the terminal to which a
signal is input.
Press the INFO button of the remote control to display the selected input terminal on the
Information OSD.
None
The input terminal is changed manually.
First
If the signal is lost in the input terminal being displayed, the monitor searches automatically
another terminal with an input signal and switches to it.
The display does not change if a new signal is input into a terminal different from the terminal
currently being displayed.
Custom
The input terminals included in the search performed by the monitor can be selected.
When the AV terminal and VGA (YPbPr) terminal are selected, the On mode
is not resumed even if a signal is input in the energy-saving mode.
HDMI Settings
CEC
This function makes it possible to control a device supporting HDMI CEC connected to the
HDMI terminal.
When set to On, HDMI CEC is enabled.
EDID
Sets the HDMI mode.
Mode 0E: Max resolution is 1920 x 1080 (60 Hz).
Mode 1E: Max resolution is 3840 x 2160 (30 Hz).
Mode 2E: Max resolution is 3840 x 2160 (60 Hz), HDCP 2.2, or HDR.
Video Range
Adjust the gradation range to be shown according to the video signal to improve the whiteout
and blackout of the image.
HPD Delay
This function makes it possible to control the time until the video from the HDMI terminal is
displayed.
When set to Off, the time until the video is output can be reduced but the video may not be
output depending on the device. In such a case, set [HPD Delay] to On.
EN:
NOT
