NEC 4001-20B - Voclan Advertisement Display User Manual Download

Page: 60 / 151

3. Projecting an Image (Basic Operation)

About Direct Power Off

The projector has a feature called "Direct Power Off". This feature allows the projector to
be turned off (even when projecting an image) using a power strip equipped with a
switch and a breaker.

Note:

Before using Direct Power Off, be sure to allow at least 20 minutes immediately
after turning on the projector and starting to display an image.

After Use

Preparation: Make sure that the projector is turned off.

1. Unplug the power cable.

2. Disconnect any other cables.

3. Return the height adjusters to their original, minimum position.

4. Cover the lens with the lens cap.

Summary of Contents for 4001-20B - Voclan Advertisement Display
























































































































































Search results

Summary of Contents for 4001-20B - Voclan Advertisement Display

Reviews:

Related manuals for 4001-20B - Voclan Advertisement Display

Brands by name

Popular brands

NEC 4001-20B - Voclan Advertisement Display, User Manual

Search results

Summary of Contents for 4001-20B - Voclan Advertisement Display

Reviews:

Related manuals for 4001-20B - Voclan Advertisement Display

Brands by name

Popular brands