NEC 320Fd Read Me First Download Page 2

Notice

The information contained in this document is subject to change without notice.

UNLESS EXPRESSLY SET FORTH IN A WRITTEN AGREEMENT SIGNED BY 

AN AUTHORIZED REPRESENTATIVE OF NEC, NEC MAKES NO WARRANTY 

OR REPRESENTATION OF ANY KIND WITH RESPECT TO THE INFORMATION 

CONTAINED HEREIN, INCLUDING WARRANTY OF MERCHANTABILITY AND 

FITNESS FOR A PURPOSE. NEC assumes no responsibility or obligation of any 

kind for any errors contained herein or in connection with the furnishing, 

performance, or use of this document.

Software described in NEC (a) is the property of NEC and/or its licensees, (b) is 

furnished only under license, and (c) may be copied or used only as expressly 

permitted under the terms of the license.

NEC documentation describes all supported features of the user interfaces and the 

application programming interfaces (API) developed by NEC and/or its licensees. 

Any undocumented features of these interfaces are intended solely for use by NEC 

personnel and are subject to change without warning.

This document is protected by copyright. All rights are reserved. No part of this 

document may be copied, reproduced, or translated, either mechanically or 

electronically, without the prior written consent of NEC Corporation of America. 

 

 

The NEC Corporation of America logo, Express5800/320F

d

, and the 

Express5800/320F

d

 logo, are trademarks of NEC Corporation of America. 

ActiveService Network is a trademark of Stratus Technologies Bermuda, Ltd. All 

other trademarks and trade names are the property of their respective owners.

Manual Name: 

Read Me First: Unpacking Express5800/320F

d

 Systems

 

Part Number: 

456-01742-000

 

Revision Number: 0

 

 

Publication Date: 

July

200

8

NEC Corporation of America

 

10850 Gold Center Drive, Suite 200

 

Rancho Cordova, CA 95670

© 2007NEC Corporation of America. All rights reserved.

Summary of Contents for 320Fd











Reviews: