8
6. AC POWER
VOLTAGE, POWER, FUSE SPECIFICATION
Input Voltage
Total Power
Frequency
110~240V
470W
50/60HZ
Fuse voltage
Electronic current
Specification
250V
6A
5
×
20
6.1 POWER PROTECT
The equipment must be operated by professionals; Make sure that the voltage of
power supply must be comply with the voltage identified on the lamp, and must have
an overload or leakage electrical protection.
ATTENTION!
Factory has equipped the standard 3 pin plug socket. Connect the power supply as
below table.
If lamp cable is damaged, replacement should be operate by factory or qualified
staff. Any question, please contact professionals or talk to a qualified electrician.
Live wire(L)
Null(N)
Ground wire
RED
BLUE
Green
7. LAMP
7.1 LAMP DESCRIPTION
LAMP MODEL
POWER OF LAMP
LIFE/HOUR
COLOR TEMPERATURE
OSRAM SIRIUS HRI
280 W
2200 HOURS
9300K
WARNING! There is a safety hazard or damage if install similar bulb
To reduce the risk of damage to light ,do change the lamp before using
time over 125% of lamp life .
LAMP REPLACE
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to avoid the greasy
dirt stains filament. filament must be kept clean
1. Disconnect the power. Before replace lamp, fixture need 20 minutes for lamp
cooling. Fasten the head with Y axis protect lock in 60
°
position.
1.
Use cross screwdriver to open the light body cover(picture 1)
（
1
）
