8
The Start/Setting Menu
1. As you can see in the picture below, the current recorder settings (On/Off) for
“ID_Input”, Respiration (“RESP”), and “Pace Maker” are shown in the Start/Setting
screen. These can be changed in the “Setting” menu. The “Lead” input is displayed in
yellow. This cannot be manually changed as it is automatically detected based on the
ECG cable connected (4-, 5-, and 7-electrode result in “3-Lead”; 10-electrode results in
“12-Lead”).
2. A 30-second countdown clock will also be displayed in the lower right-hand portion of
the screen. This gives the user an opportunity to adjust settings, if so desired.
3. The blue Up and Down arrow buttons on the recorder allow the user to navigate
between “Start” (which confirms the settings and prompts the recorder to proceed to the
next display), and “Setting” (which allows the user to adjust the settings before the ECG
recording begins). Press the orange “Enter” button to confirm the selection of “Start” or
“Setting”. For instructions on adjusting settings, please refer to #9 below.
