Nebula Alkaid Spot 20.0, User Manual

Page: 6 / 16

- 5 -
6. MOUNTING AND INSTALLATION
6.1 MOUNTING
● The fixture can be mounted in any position.
● Always ensure that mounting surface can withstand 10 times the weight of the fixture.
● Always use a safety cable when mounting the fixture in any elevated position.
t
IMPORTANT SAFETY NOTE!!
Always use a safety cable when installing this unit!!
Be sure that the safety cable is connected to a solid load-bearing structure.
6.2 FUSE REPLACEMENT
● Remove the safety cap by a screwdriver.
● F etch the old fuse from safety cap.
● I nstall a new fuse.
● I nstall the safety cap.
● Fuse:3A,250V
7. DISPLAY PANEL INTRODUCTION
Using the display panel to set the starting DMX address or make other settings. The
functions provided are described in the following sections.
【
MENU
】
Scroll through the main menu or exit from the current sub-menu.
【
UP
】
Scroll “Up” through the menu list or increase the value of the current function.
【
DOWN
】
Scroll “Down” through the menu list or decrease the value of the current
function.
【
ENTER
】
Enter the currently selected menu or confirm the
current function value.
【
DMX Indicator Light
】
Light on when input DMX signal.
【
ERR Indicator Light
】
Light on when in Sound Control mode.