— 13 —
CHARGING
CHARGING PINNACLE 2400 AT HOME:
1. Connect the AC Power Cord (included) into the Pinnacle 2400 AC input port.
Plug the other end into a AC wall outlet. Charging will begin automatically.
Press the “MODE” button to switch between fast charge at 1200 watts
or reduced power at 300 watts. Use reduced power if your AC outlet
is being shared.
2. When fully charged, the input watts will display 0 and the Digital Display will
indicate 100%. (Full charge could take up to 2 hours)
3. Disconnect cable and power off your Pinnacle 2400.
CHARGING PINNACLE 2400 IN YOUR VEHICLE:
1. Plug the 12V DC Power Cord (included) into the Solar/Anderson Input port.
Plug the other end into the vehicles DC output (cigarette lighter). Charging
will begin automatically.
2. When fully charged, the input watts will display 0 and the Digital Display will
indicate 100%. (Full charge could take up to 20 hours)
3. Disconnect cable and power off your Pinnacle 2400.
NOTE: To avoid discharging
your vehicle battery, be sure
to start your vehicle.
AC Power Cord
(Included)
DC to Anderson
Power Cord
(Included)
