42
43
TM
TM
Neato Botvac
™
User Manual
Neato Botvac
™
User Manual
P l e a s e w a i t
w h i l e I
c h e c k m y
s u r r o u n d i n g .
Botvac is trying to
locate itself in the
environment.
Give the robot a
moment to orient
itself in the room.
Note: If you pick up
the robot and move
it in the room it may
become disoriented.
Avoid picking up
the robot during a
cleaning cycle. If this
is a recurring issue
try moving objects
around to give the
robot better reference
points to use for
navigating.
P l e a s e D u s t
m e o f f s o
t h a t I
c a n s e e .
The robot cannot
sense the environment
because the laser is
blocked.
Make sure the
protective screen
film has been fully
removed and is
not peeling up and
blocking the
robot’s vision.
Use a clean cloth to
pick up any dirt or
dust on or around
the turret.
P l e a s e e m p t y
m y D i r t B i n
a n d F i l t e r i f
n e e d e d .
The dirt bin and the
filter may be full of
dust or debris.
Empty the dirt bin
and make sure filter
is clear of debris. Put
dirt bin and filter back
into the robot.
I c a n ’ t
s h u t d o w n
w h i l e I a m
c o n n e c t e d
t o p o w e r .
The robot cannot
shutdown while it
is connected to the
charge base.
Remove your robot
from the charge base
before attempting to
shutdown.
P l e a s e c h e c k
m y f i l t e r
a n d D i r t B i n .
There is a problem
with the filter or
dirt bin.
Make sure the dirt bin
is empty, that the filter
is in place and not
obstructed, and that
the dirt bin is properly
inserted.
P l e a s e p u t
m y D i r t B i n
b a c k i n .
The dirt bin cannot be
detected.
Make sure the dirt bin
is in the robot and
properly seated in
position. The top of
the dirt bin should be
level with the top of
the robot if inserted
correctly.
M y R i g h t
W h e e l
i s s t u c k .
P l e a s e f r e e
i t f r o m
d e b r i s .
The right wheel is
stuck and the robot is
experiencing mobility
problems.
Make sure the wheel
does not have debris
wrapped around it.
If issue persists,
please contact Neato
Customer Care. Go to
neatorobotics.com
and click on
Support
for additional
information.
