Neatech DYNA, User Manual

Page: 47 / 100

31
3.2. Lever operated functions
Wheelchair has the possibility to be equipped with some functions operated with levers. These functions are:
•
Seat tilt operated
•
Dynamic backrest with pistons
•
Dynamic active backrest with gas springs
According to the configuration of the wheelchair, each of these functions must be operated with one of following levers.
A
This lever is located on the upper part of
push handle. Press and hold it to operate
the related function.
B
This lever is located on the lower part of
push handle. Press and hold it to operate
the related function.
C
This level is located on the lower part of
push handle. This lever is used for
dynamic active backrest. When the black
level is completely down, the gas spring is
locked. In order to unlock it pull the black
lever up. In order to lock it in a certain
position: pull the black lever up, put the
backrest in the desired position, pull the
red lever up and push the black lever
down.