Neatech DYNA, User Manual

Page: 59 / 100

43
WARNING
The wheelchair should be inspected by a manufacturer's representative before reuse following involvement in any
type of vehicle collision.
WARNING
The wheelchair was crash tested according ISO 7176-19 with the seating system set in the DEFAULT POSITION.
Particularly the wheelchair was tested with the seat horizontal, the legrest completely down and backrest
completely up. Please pay special attention if you use the wheelchair in a car with a different positioning.
WARNING
In any case when using the wheelchair as a seat in a motor vehicle the seat height must be at the lowest position.
WARNING
The wheelchair has lots of configurations and accessories. The wheelchair safety when used as a seat in a motor
vehicle is assured by the manufactured if the specific configuration is mentioned in the order form and if all
instructions in the manual are followed. Particularly it may exist some options or accessories that are not
compatible with the use of the wheelchair as a seat in a motor vehicle, or it may exist some accessories that require
some precautions.