NEO IP/GSM Technical Handbook
Document number: NE41 09002-02 v2.0
8.9.1
Call information
NEO IP/GSM can ring a total of six numbers and this tab determines the proper-
ties for each of the telephone number. The numbers are named “A”, “B”, “C”, “D”,
“Night mode” and “Redirection”.
8.9.2 Telephone number
The number can be a telephone number, a SIP number, an URL or an IP address.
•
Telephone number. With or without country/area code, eg. +4646707065
•
SIP number, eg. 464659707065
• URL, eg. http://www.neatelectronics.se
•
IP address, eg. 192.168.1.1 (even with a port is possible: 192.168.1.1:5060)
8.9.3 Call type
Specifies what call type the number is.
•
No call type (default)
•
SIP 1/SIP2. Depends on SIP acocunt parameters, see 8.15.2 SIP on page 51.
•
GSM. Depends on the GSM parameters, see 8.11.3 GSM on page 46.
8.9.4 Alarm code
Specifies what alarm code to use for the given call type.
8.9.5 Protocol
Specifies the protocol for the given call type.
8.9.6
Call attempts
Specifies the number of call attempts for the given call type.
8.10
Timers and indications tab
Picture 22.
The timers and indications tab
NEO IP Programmer software
42 of 56