Neat D-SERVER Technical Handbook Download

Page: 23 / 124

NE41 09010-02 v3.0

D-SERVER

Technical Handbook

neat

2.9.2 Power requirements

The IP-DECT Server 400 can be power supplied either from an AC adaptor or via

PoE Class 1.

2.9.3 Spectralink IP-DECT Base station

To add coverage range to the IP-DECT Server 400 up to three IP-DECT Base stations

can be added.

Picture 25.

IP-DECT Base station

More infomation is found here:

http://www.spectralink.com/products/dect/infra-

structure/spectralink-ip-dect-base-station

2.9.4 Spectralink DECT Repeater

To further add coverage the IP-DECT Server 400 and each IP-DECT Base station can

connect to three DECT repeaters each.
More infomation is found here:

http://www.spectralink.com/products/dect/infra-

structure/spectralink-dect-repeater

Picture 26.

DECT Repeater

Summary of Contents for D-SERVER





























































































































Search results

Summary of Contents for D-SERVER

Reviews:

Related manuals for D-SERVER

Brands by name

Popular brands

Neat D-SERVER, Technical Handbook

Search results

Summary of Contents for D-SERVER

Reviews:

Related manuals for D-SERVER

Brands by name

Popular brands