NE41 17030-02 v1.0
D-POS II
- Technical Handbook
neat
18
6.2.6 Read of switches
All these values are read-only and only for supplying info to the user.
6.2.7 General info
All these values are read-only and only for supplying info to the user.
6.3 Radio tab
Picture 7.
Radio tab
6.3.1 Radio receiver
This section displayes the values for radio reception.
ID code 1-8
These are the radio id codes of the attached radio devices.
Send acknowledge (ACK)
Determine whether the unit sends acknowledges when radio messages are received.
Default = Yes, function on.
D-SERVER system ID
Enter the D-SERVER system ID where the D-POS II unit is used.
Entering 0 (zero) means the D-POS II unit is not used in a D-SERVER system.
Group activation code
Enter the
Value range:
Default = 0 (zero)
Receive frequency band
Set the reception frequency for the unit.
Default = 869.2 MHz
