On/Off/Pause
• Press and hold the button
for 3 seconds to turn on the machine; The power indicator flashes slowly in white, and changes
to a steady blue light after 5 seconds, and then the robot enters the standby state; Short press the button to clean all; or press
and hold the button
for 3 seconds to start the spot cleaning.
• When the robot is still, press the button
for 3 seconds to turn off the machine. The power indicator flashes blue quickly and
will go out after 5 seconds.
• In the process of cleaning, short press the button
, then the robot will pause.
• If the robot is still and has not operated for more than 20 minutes, it will enter the hibernate state. In the hibernate state, you
can give any button a brief press to wake up the machine.
Note:
During charging, the robot cannot be turned off.
Get Started
13
8. Cleaning
Add Water to the Water Tank or Clean the Mop
Cloth Mid Way
• Short press this button
, the robot will pause, remove
the mopping module, after adding water or cleaning the
mop, reinstall the mopping module, short press this button
again to continue cleaning.
Set the Cleaning Mode
• The machine is the standard mode by default; After it is
connected with App, you can select more modes in the App.
Failure State
• When the robot is abnormal. it will give a voice prompt and the
power indicator will blink in orange. Please refer to "Trouble-
shooting" for solutions.
• When there is no operation for 10 minutes under the failure
state, the robot will hibernate automatically.
• When the machine runs abnormally, the power indicator will
blink in orange, and the machine does when some faults occur.
Please refer to the table below for a solution.
Automatic Recharge/Manual Recharge
• When the battery is low during cleaning, or when the
cleaning is finished, the robot will automatically recharge.
• During cleaning, short press the button
, then the robot
will return to the self-emptying dustbin to recharge.
