STAIRCASE LOFT
BED
Assembly Instructions
Page 1 of 21
NE kids
·
2300 Prospect Dr. Christiansburg, VA 24073
·
www.ne-kids.com
NE
k i d s
Item No. X090
1.
Follow the information on the warnings appearing on the upper bunk end structure and on the
carton. Do not remove warning label from bed.
2.
Always use the recommended size mattress or mattress support, or both, to help prevent
entrapment or falls.
3.
Surface of mattress must be at least 5 inches (127 mm) below the upper edge of guardrails.
4.
Do not allow children under 6 years of age to use the upper bunk.
5.
Prohibit more than one person on the upper bunk.
6.
Periodically, check and ensure that the guardrail, stairs, and other components are in their proper
position, free from damage, and that all connectors are tight.
7.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8.
Always use the stairs for entering and leaving the upper bunk.
9.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
10.
Use of a nightlight may provide added safety precaution for a child using the upper bunk.
11.
Always use guardrails on both long sides of the upper bunk. If bunk bed will be placed next to the
wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent
entrapment between the bed and wall.
12.
The use of water or sleep flotation mattresses is prohibited.
13. Keep these instructions for future reference.
!
!
STRANGULATION HAZARD
Never attach or hang items to any part of the bunk bed that are not designed for use with the bed;
including, but not limited to, hooks, belts and jump ropes
SIZE OF MATTRESS AND FOUNDATION
Use only mattress, foundation and deck combined which is 74-75 inches long and 37 ½-38 ½ inches wide
on upper bunk. Ensure thickness of mattress and foundation combined does not exceed 8 inches and the
mattress is at least 5 inches below upper edge of guardrails.
SAFETY WARNINGS
SAFETY FIRST!
All of NE kid’s Bunkbeds were
designed and manufactured with
your child’s safety as our top
priority.
Their unparalleled strength is a
bi-product of the safety design.
Our bunks meet all compliance
with ASTM F 1427-07 “Standard
Consumer Safety Specification
for Bunk Beds” and Code of
Federal Regulations (CFR) 1213
“Safety Standards for Entrapment
Hazards in Bunk Beds” and
(CFR) 1513 “Requirements for
Bunk Beds”.
Safety is a cooperative effort
between us as the manufacturer,
and you as a guardian.
Please
read and consider the
warnings listed on this page
when choosing a mattress and
discussing rules of use with your
child.
REPLACEMENT PARTS
Replacement parts, including
additional guardrails, may be
obtained from any of
NE kids’
dealers.