8
Procedures
Set an appropriate container beneath the ejection neck
.
Before cutting, please lift the pressing handle of the filler dasher and keep it in that position.
In order to activate the vegetable cutter, press the green START-button with your right hand while holding the
pressing handle with your left..
Insert appropriate vegetables into the round or oval openings
.
Now press down the pressing handle with light force in order to achieve better cutting results.
Lift the pressing handle when it reaches the stop
.
When finished with cutting, just press the red STOP-button in order to switch off the device. Disconnect the
device from the power socket.
Connect the device to a properly installed and grounded single power socket. Please keep the plug cord
away from cutting or flammable parts near the plug
Figure-3
Please look at figure 3 to run the machine.
Press (I) in order to start the machine.
Press (0) in order to stop the machine.
.
III.
MAINTENANCE AND CLEANING
3.1. Cleaning Instructions
The machine must
not be cleaned with a high pressure jet.
The device should be cleaned regularly
.
Put on safety gloves before cleaning in order to protect your hands from the sharp knife slots of the cutting
discs.
Loosen the safety catch and fold the protective cover to the side
.
Remove the cutting discs carefully, dunk them into warm water and clean them thoroughly with a brush. Clean
the cutting discs on at a time so they cannot damage each other at
contact
.
Warning
The cutting discs are not dishwasher proof!
Clean the cover and the tappets of the device with warm water and a mild detergent
.
Rinse with clear water. Dry the device with a soft cloth
.
Wipe off all parts with a soft sponge or cloth and a mild cleaning agent. Wipe over with a soft, moistened
cloth, until all cleaner residues are removed
.
Only use a soft cloth and make sure you never use any kind of abrasive agents or pads which could
scratch the surface.
USER MANUAL
PREPARIN DUSTRIO
