UVe-LUX Operators Manual ver 1_02.docx
2
24/11/2009
the manufacturer for repair and re-calibration.
2.2
Meter housing
The Meter housing contains the display screen, buttons
and battery for the unit. The meter housing is rated at
IP64 for moisture and dust ingress and should it need
cleaning it can be cleaned with a damp cloth and using
mild detergent.
2.3
Buttons
On/Off button:
Pressing this button when the unit is off will switch the UVe-LUX on.
Holding this button down when the system is on will switch the system off.
Pressing this button while the system is in measurement mode will reset the max WL
and max UV readings.
Pressing this button while the system is in menu mode will select the currently
highlighted menu function.
Down button:
Pressing the down button in measurement mode makes the screen
darker by one count.
Holding this button down in measurement mode will keep decreasing the screen
brightness until the button is released.
Pressing the down button in menu mode will cycle down through the menu options.
Holding the button down in menu mode will keep cycling down through the menu options.
Up button:
Holding this button down and then pressing the On/Off button when the
unit is powered off and keeping it held down until after the welcome screen has
appeared will enter menu mode.
In measurement mode pressing this button will lighter the screen by one count.
Figure 2 Meter housing
Figure 3 Display
Figure 4 Buttons
