NDS SMARTCHARGER SCM25, User Manual

Page: 9 / 20

See the charging curve full description (Page 9).
Follow this steps to start the charge:
1. Connect the SMART CHARGER to the battery (P.5),
then plug the AC power socket. The power status led
will turn on.
2. Select charging voltage by pressing the 12V / 24V
Button
3. If everything is ok SMART CHARGER will start
charging directly.
Use the “ MODE ” selection button to switch between
auto, AGM, Lithium, charging curve.
When a charging curve or mode is selected, the
process will start.
4. SMART CHARGER will check battery status before to
start. If the battery is ok the charge will start
normally (step 6), if not the device will try to recover
the battery (step 5).
5. If there’s something wrong with the battery
SMART CHARGER will try to recover by the Rescue
mode.
Rescue can take 30 to 120 minutes.
7
NOTE
If the AC power socket is connected before connecting the
clamps to the battery, the error led will be turned on
Connect the clamps to the battery then push the mode selection
button to restart the process. MODE
AGM
LITHIUM
LiFePO
4
12V
24V