Apply the adhesive strips respecting the illustration:
• perimeter margin (min. 2cm)
• space in the central part of the panel (approx. 5cm)
This will ensure air circulation to cool down the cells.
After the panel has been applied to the vehicle surface,
do not press and do not place weights on the panel.
It is possible to apply adhesive tape with non-
aggressive glue to make the corners of the panel
adhere well, taking care to remove them at the end of
the work.
3. MAINTENANCE
In order to always obtain the maximum yield from the
solar panel, keep the cells free of impurities and avoid
scratching the surface. To clean the panel use a damp
micro-fibre cloth, if it is not sufficient to use neutral,
non-aggressive and suitably diluted detergents.
Caution: avoid treading on the panels, especially
with hard, sharp soles, and respect the flexibility
limit of each model to avoid cell breakdown.
4. WARRANTY CONDITIONS
This document summarizes the conditions of the Legal
Warranty of Conformity (hereinafter also referred to as
"Warranty") in relation to NDS ENERGY S.r.l. products
(hereinafter referred to as "NDS ENERGY") - single-
member company, with registered office in Cappelle
sul Tavo (PE), via G. Pascoli, 169 - (hereinafter also
referred to as "Product"), pursuant to the "Consumer
Code" Legislative Decree 206/2005.
NDS ENERGY guarantees its flexible and semi-flexible
photovoltaic panels for 24 months for defects of
10