NDS Dometic PSB12-40, Installation And Operating Manual

Page: 24 / 444

EN
Problem Possible cause Suggested remedy
agent after it has been triggered
by excess current.
The LED flashes red and a beep
sounds. The device fuse is defective.
The device fuse must be re-
placed by an authorized service
agent after it has been triggered
by excess current.
13 Disposal
Recycling packaging material: Place the packaging material in the appropriate recycling waste bins wher-
ever possible.
Recycling products with non-replaceable batteries, rechargeable batteries or light sources:
• If the product contains any non-replaceable batteries, rechargeable batteries or light sources, you
don't have to remove them before disposal.
• If you wish to finally dispose of the product, ask your local recycling center or specialist dealer for
details about how to do this in accordance with the applicable disposal regulations.
• The product can be disposed free of charge.
14 Warranty
The statutory warranty period applies. If the product is defective, please contact the manufacturer's branch in your
country (see
dometic.com/dealer ) or your retailer.
For repair and warranty processing, please include the following documents when you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
Note that self-repair or nonprofessional repair can have safety consequences and might void the warranty.
15 Technical data
PSB12-40, PSB12-80 PSB24-40,
PSB24-60 PSB12/24-20,
PSB12/24-40 PSB24/12-40,
PSB24/12-80
Input voltage 9 V … 16 18 V … 32 9 V … 16 18 V … 32
Output voltage 9 V … 16 18 V … 32 18 V … 32 9 V … 16
Max. input voltage 35 V
Output charging current 40 A 80 A 40 A 60 A 20 A 40 A 40 A 80 A
Max. standby current
consumption ≤ 4 mA
Peak efficiency 97 %
22