NDI BirdDog PF120, User Manual

Page: 20 / 44

17
Gamma
Adjusts the gamma of the image.
De-Flicker
Turning this on can help reduce the image flicker that can occur if the camera frame rate is different to the
frequency of the local electricity supply that is powering the scene lighting.
Color Matrix
Adjusts of hue and gain for magenta, red, yellow, green, cyan and blue.
Zoom Menu
Digital Zoom
On: 16X digital zoom is activated. Digital zoom activates after the optical zoom reaches MAX (20X).
Off: Only optical zoom is available.
Zoom Ratio OSD
Determines whether the zoom ratio displays on screen.
MF Speed
Choose between eight manual focus speeds.
Preset Speed
Set the preset recall movement speed from 0 to 5.
Tally Mode
Acivate the Tally light.
System Menu
Pelco ID
When using RS232 control, set Camera ID to the controlled address. This value is from 001-255.
Display Info
When this item is set to ON, the camera configuration is displayed for approx. 3 seconds on the screen when the
camera is powered on or rebooted.
Audio
Set to ON to enable camera MIC / Audio IN to capture an audio signal source. Set to OFF by default.
Preset Memory
This feature allows you to save the image parameters to PRESET memory. Parameters such as picture, white
balance, exposure, focus mode, zoom positions can be saved with the preset.
Factory Reset
Select this item to set camera back to the factory default setting. Press the HOME button to confirm the action. All
user settings for the camera will be deleted.
BaudRate
This feature sets the RS232 baudrate. The default value is 9600.