manualshive.com logo in svg

NDD EasyOne, Operator'S Manual

Share
Download
NDD EasyOne Operator'S Manual Download Page 83

Working with patient data and reports

Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect

© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch

83/144

92

 

10.1.2

Editing patient data on 

EasyOne Air

 > 

1

Choose .

2

Choose .

The patient selection list is displayed.

3

Select a patient.

The summary screen is displayed.

4

Choose a list item.

5 CAUTION! 

False diagnosis: The predicted values and the system 

interpretation are based on the patient demographic data. Therefore, 
wrong patient data can cause false results. Enter patient data 
meticulously. Double-check that you have entered the patient data 
correctly.
Edit the entry and, if applicable, choose 

OK

.

Note that these changes only apply to sessions going forward and not 

to previous sessions.

6

Choose 

OK

.

7

Choose the home button.

10.1.3

Deleting a patient from the database on 

EasyOne Air

 > 

1

Choose .

2

Choose .

The patient selection list is displayed.

3

Select a patient and confirm the message that is displayed.

The selected patient data is deleted.

Summary of Contents for EasyOne

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands