Configuration
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
117
11.2.4.8
Utilities > Configuration > Test > Provocation
Protocol
Different protocols for the provocation test are available using Mannitol and
Methacholine as provocative agents.
Choose the protocol from the drop-down list.
11.2.5
Description of device configurations of
EasyOne Connect
Utilities > Configuration > Device
You can use
EasyOne Connect
in combination with any
EasyOne
product.
Easy on-PC
This tab displays hardware information about the connected
Easy on-PC
sensor.
If the
Easy on-PC
sensor cannot connect, the serial COM port might be used
by another device. To switch to a free serial COM port, you can manually select
one from the drop-down list or choose the
Auto Detect
button.
Easy on-PC
Operator’s Manual
EasyOne Air
Utilities > Configuration > Device > Selection
From this tab, select the device that you want to use for performing spirometry
with
EasyOne Connect
.
11.2.6
Description of report configurations of
EasyOne Connect
Utilities > Configuration > Report
Layout
CAUTION
MISINTERPRETATION OF RESULTS
Reports that are labeled as
Custom Report
are not validated.
Use customized reports at your own risk.
The layout editor allows for customization of the reports’ layout.
For details, contact your
EasyOne
dealer or the
ndd
Servicing Department.
