InstantWave
11Mbps
Wireless Ethernet Client
13
Ethernet
This card is used to set the WEC’s Ethernet port settings.
Figure 10. Configuration/Ethernet
Auto Detect
If
Auto Detect
is selected, the WEC will use the MAC
address of the connecting Ethernet device as its MAC
address.
Fixed Address
This option allows you to specify a specific Ethernet
device MAC address that is allowed to pass traffic
through the WEC.
Always Connect
Selecting this option keeps the WEC always associated
with an Access Point, regardless of whether an Ethernet
device is connected to the WEC.
Idle Time
The
Idle Time
option determines the amount of time the
WEC may be idle (no packets received from or
transmitted to it) before it disconnects from the
associated Access Point. Specify a time from 60 to
60,000 seconds for this option.
