iSTAR User Manual /
v1.2
/
10
WiFi IP Settings
√ Automatic IP (DHCP)
100.0.0.0
IP:
100.0.0.0
Router:
100.0.0.0
Netmask:
WiFi IP settings
To change the IP settings within AP mode, Press the “Automatic
IP” button to switch on automatic IP. To enter manually, un-tick
the button if it is ticked and enter the settings by clicking on the
IP, Netmask, and Router buttons.
Ethernet IP settings
From the Settings Menu, press the
icon to navigate to the
“Network Settings” screen.
1. To network iSTAR with an Ethernet cable, make sure the cable
is connected.
2. If connected to a DHCP enabled router the Automatic IP should
be enabled in iSTAR to obtain its network settings.
3. To use manual network settings, touch the “Automatic IP”
button to toggle between Automatic and Manual settings.
9. Settings: Network
From the Settings menu, press the
icon to navigate to the
“Network Settings” screen.
Ethernet IP Settings
√ Automatic IP (DHCP)
10.0.0.52
IP:
10.0.0.255
Router:
255.0.0.0
Netmask:
Adhoc Mode (excluding Android devices)
1. To connect iSTAR to a WiFi enabled device, select Adhoc mode
then in the WiFi settings on your device, select “iSTAR” as
the device.
2. From an internet browser, enter the IP address 10.0.0.52 in the
address bar. The iSTAR capture screen will then display in your
browser window.
AP Mode
1. Press the SSID button to locate a WiFi network.
2. Once selected, press the Password button to display the
keypad and enter the WiFi password.
3. Press OK to save the password and return to WiFi settings.
WiFi Settings
Adhoc mode
WiFi
WiFi Settings
10.0.0.52
AP mode
SSID:
WiFi
IP Settings...
12345678
Password:
WiFi settings
From the Settings Menu, press the
icon to navigate to the “WiFi Settings” screen. You can
choose to connect to a device (Adhoc Mode), or connect iSTAR to a wireless network (AP Mode).
9. Settings
From the start menu, press the
icon to navigate to the
“Settings” screen.
Firmware Version and Serial Number
Press the icon to see the units Firmware Version and Serial
Number.
i