Bottom bracket sensors for E-Bikes
NCTE
Page
3
of
12
Sensor version
S-BB-RT
S-BB-R
S-BB-RP
Pulse generator (impulse/revolution)
32
32
72
Torque signal output bandwidth
250 Hz
-
-
Measuring range: Torque
±200 Nm
-
-
Signal quality: Torque
±2,5% FS bezogen auf Linearität
-
-
Torque error signal output
Dauerhaft ca. 2,5 V
1
-
-
Characteristic value of the signal output
10 mV/Nm (+/- 2,5%FS)
-
-
Supply voltage
+7
… 16 V DC
+3 … 18
V DC
+4,8 … 16
V DC
Signal output bandwidth angle sensor
4 kHz
Power consumption in operation
20 mA
Bearing
2x 61902-16-2RS
Shaft surface
Zinc-plated
Certification according to DIN ISO
15194:2017
Yes
2
Sleeve
TECHNOMELT®
Thread
BSA 1,375x24
Protection class
IP 64
3
Salt water spray test according to
DIN EN 60068-2-252:2018
Test duration 96 hours passed
4
Dynamic test according to
DIN EN 15194:2018-11
Test for city and trekking passed
Do not use magnets or magnetized tools during assembly, as this may change the
magnetic field of the shaft.
In this case, the bottom bracket can become permanently non-functional!
Any changes to the product will void the warranty.
1
With constant signal output during operation
2
The configuration of the test setup for product release can be obtained from NCTE on request.
3
In installed condition
4
In installed condition
Technical characteristics
–
S-BB-RT/S-BB-R/S-BB-RP
