2-2
Chapter 2: Hardware Installation
Installation Summary
Remove the terminal from the shipping packaging and verify the hardware
configuration. Connect the peripheral and communication cables.
Connect the terminal to its mount.
Attach the Power Brick to the system and to an AC power source.
Connect the peripheral and communication cables.
Connect a USB keyboard to the terminal. This is needed to accept the license
agreement during system boot because the touch screen is not available at that
time.
After power is applied to the terminal the Power
‐
up self
‐
tests run to verify basic
functionality.
ROM
‐
based setup should be used to configure network options. Full
configuration depends upon the system server and the management web site.
Installation Restrictions
Before installing the NCR SelfServ 60, read and follow the guidelines in the
NCR
SelfServ 60 Site Preparation Guide
(B005
‐
0000
‐
1890) and the
NCR Workstation and
Peripheral AC Wiring Guide
(BST0
‐
2115
‐
53).
Install the NCR SelfServ 60 near an electrical outlet that is easily accessible. Use
the power cord as a power disconnect device.
Do not permit any object to rest on the power cord. Do not locate the NCR
SelfServ 60 where the power cord can be walked on.
Use a grounding strap or touch a grounded metal object to discharge any static
electricity from your body before servicing the NCR SelfServ 60.
Warning:
This unit contains hazardous voltages and should only be serviced by
qualified service personnel.
Warning:
DO NOT connect or disconnect the transaction printer while the terminal
is connected to AC power. This can result in system or printer damage.
Warning:
DO NOT connect or disconnect any serial peripherals while the terminal
is connected to AC power. This can result in system or printer damage.
Warning:
The
NCR SelfServ 60
must be mounted securely to prevent a hazard. It
must be installed in accordance with local building codes. The post or wall on
which the unit is mounted should be able to withstand four times the weight of the
unit.
Summary of Contents for Self Serv 60
Page 43: ...1 34 Chapter 1 Product Overview...
Page 69: ...3 10 Chapter 3 BIOS Settings...
