29
5. Route the printer cable out the back of the terminal and set the printer in the tray
opening.
NCR 7197/7198 Only:
First install the 7459-K316 Printer Skirt, route the cable out the
back of the terminal, and then set the printer in the cabinet.
NCR 7167/7168 Only:
Route the cable through the Cable Strain Relief and then set
the printer in the cabinet.
26319a
Printer Skirt
7459-K316 (Charcoal)
7606-K313 (Black)
7197/7198 Printer
7167/7168 Printer
Release 1.0
To Printer
To Host
Printer Cable Connections
The printers can connect through a USB connector or an RS-232 connector. It receives
power through a Powered USB power cable.
USB Installation
Connect the Powered USB Printer Interface Cable to the USB Connector and Power
Connector on the printer and to the 24 V Powered USB Connector on the terminal.
Summary of Contents for RealPOS XR8
