Mount for Integrated XL7 Customer Display
5
9. Lay the XL7 display face down on a flat surface.
Caution:
Always use a soft material (cloth, foam) to protect the display screen when
placing the terminal face down.
10. Connect the USB-C Cable to the back of the XL7 display. Tighten the thumbscrew.
Note:
Avoid excessive tightening of the thumbscrew. Fully insert the USB-C male
connector against the housing and tighten the thumbscrew only until the silver
knurled portion touches the black plastic overmold. There should be no gap between
the thumbscrew and the overmold, and no looseness in the overmold once the
thumbscrew is properly tightened.