NCR 7707-K903, Kit Instructions, Page: 6 / 12

E-Money Terminal Mount (WAON RW) 3
Installation Procedures
To install WAON RW E-Money Terminal Mount on an NCR SelfServ™ Checkout (7707)
unit, follow these steps:
Note: Use a #2 Phillips Magnetized Screwdriver to easily handle the screws.
1. Do either of the following:
• Remove the existing E-Money Terminal, if necessary. For more information, refer
to
NCR SelfServ™ Checkout (7707) Hardware Service Guide (BCC5-0000-5237) .
• For units with no E-Money Terminal, remove the Blanking Plate. For more
information, refer to
Removing E-Money Terminal Blanking Plate on page 9.
2. Install the WAON RW E-Money Terminal on the E-Money Terminal Mount by
doing the following:
a. Connect the power and data cables to the E-Money Terminal.
b. Insert the E-Money Terminal onto the Upper Mounting Bracket, as shown in the
image below.