2
R6-Japan Camera
Installation Procedures
To install the R6-Japan Camera, follow these steps:
1. Do any of the following, if necessary:
•
Remove the existing Camera. For more information, refer to
•
For units without Camera, remove the Camera Blanking Plate. For more
information, refer to
Removing Camera Blanking Plate
2. Route the camera cables. For more information, refer to
3. Install the R6-Japan Camera. For more information, refer to
4. Turn on the R6-Japan unit. The ADD/CADD window is displayed, showing available
devices. For more information, refer to
NCR SelfServ™ Checkout (7707) R6-Japan
Hardware Service Guide (BCC5-0000-5237)
.
Note:
The SelfServ Checkout application automatically runs and installs all available
devices. If the new or replaced device is not listed in the ADD/CADD window, an
error message is displayed. Follow the instructions on how to fix the error and then,
restart the system.
