7360-K903/K906/K907/K908 Coupon Printer Tray and Pole
Mount
11
Installing Coupon Printer Pole Mount Assembly
Installing the Pole Mount for the Coupon Printer and its corresponding Coupon Printer
Tray involves the following procedures:
A.
Installing Tri–Light/Lane Light Pole
B.
Installing Rotating Arm Assembly
Installing Tri–Light/Lane Light Pole
To install the Tri–Light/Lane Light Pole that is compatible with the Rotating Arm
assembly for the Coupon Printer Tray, follow these steps:
1. Remove the existing Tri–Light/Lane Light pole, if necessary. For more information,
refer to
Removing Existing Tri–Light/Lane Light Pole
2. Insert the Tri–Light/Lane Light cable through the opening on the side of Tri–
Light/Lane Light pole and route it out the top of the pole.
Note:
If installing a Secondary Display, route the display cables out of the smaller
hole on the back of the pole. For information about how to install the Display, refer
to the NCR FastLane SelfServ™ Checkout (7360) Hardware Service Guide (B005-0000-
2378).
