2
7360-K710/K711/K713/K728/K729/K731 Attendant
Checkstand
Installation Procedure
1. Move the Attendant Checkstand to the installation location.
2. Level the Attendant Checkstand.
a. Drop all of the leveling feet until they touch the floor.
b. Place a level left–to-right on the Checkstand.
c. Adjust the leveling feet to obtain a level left–to–right reading.
d. Turn the level so that it sits front–to–back on the Checkstand. Determine and
make any adjustments necessary.
e. Verify that the unit is still level from left–to–right by placing the level left–to–
right on the Checkstand. Make necessary adjustments.
f.
Check to make sure the unit does not wobble or rock by placing hands and
exerting moderate pressure on various parts of the Checkstand.
g. Verify that all leveling feet are solidly on the floor. Sometimes the feet previously
adjusted may rise off the floor when other feet are adjusted.