10
7360-K429 No Handle PIN Pad Mount (Equinox Luxe
8000i/8500i)
Installing Equinox Luxe 8000i/8500i PIN Pad
To install the Equinox Luxe 8000i/8500i PIN Pad, follow these steps:
Note:
For the purpose of illustration only, this procedure shows images using a
Standard Configuration unit.
Note:
The Equinox Luxe 8000i/8500i PIN Pad is not included in the
7360-K429 No
Handle PIN Pad Kit
. For more information, contact an NCR Customer Service
Representative.
1. Connect the PIN Pad cable to the RS232/A port of the Primary Terminal Display.
2. Do the following:
a. Route the PIN Pad cable down to the back panel opening for the PIN Pad arm.
b. Route the PIN Pad cable through the cable clamps under the PIN Pad arm and
out of the PIN Pad Mount, as shown in the image below.
Note:
On a Credit/Debit Only Configuration, route the cable through the PIN
Pad arm and out of the PIN Pad Mount.