Large Basket Module (Medium Gray)
41
Changing Modular Large Basket (Basket) Orientation
To change the orientation of the Corner Bagwell, follow these steps:
Note:
For the purpose of illustration only, this procedure shows images using Right-
hand (RH) orientation.
1. Do the following:
a. Remove the Top Trays from the Large Basket (Basket) Module. For more
information, refer to
Removing Modular Large Basket Bagwell Top Trays
b. Remove the V-Bagwell. For more information, refer to
Note:
If the V-Bagwell is equipped with a Bottom-of-Basket (BoB) Camera,
ensure that the camera cable is disconnected from the SelfServ Checkout unit.
For more information about changing the orientation of the Bottom-of-
Basket Camera, refer to 7358-K582
Bottom-of-Basket Camera Kit Instructions
.
c. Remove the Corner Bagwell. For more information, refer to
2. Install the Bagwells by doing the following:
Note:
Ensure that the hole plugs are inserted at the opposite side before installing
in the new orientation.
d. Install the Corner Bagwell to the other side of the SelfServ Checkout unit. For
more information, refer to
Installing Corner Bagwell Assembly (7358)
e. Install the V-Bagwell. Ensure that the V-Bagwell orientation is the same with the
Corner Bagwell. For more information, refer to
Note:
If the V-Bagwell is equipped with a Bottom-of-Basket Camera, change the
orientation of the camera. For more information, refer to
7358-K582 Bottom-of-
Basket Camera Kit Instructions
.
