NCR 7167, Owner'S Manual

Page: 151 / 313

7167 Owner’s Manual Chapter 6: Commands
November 2002 129
Values and Ranges:
Receipt
c = the ASCII codes of the first ( c 1) and last ( c 2) characters respectively
c 1 = Hex 20-FF (Hex 20 is always printed as a space)
c 2 = Hex 20-FF (Hex 20 is always printed as a space)
To define only one character, use the same code for both c 1 and c 2.
n = the number of dot columns for the nth character as specified by n 1 ... n n
n = 1-10 (standard pitch), 12 and less accepted but ignored
n = 1-8 (compressed pitch), 12 and less accepted but ignored
d = the column data for the nth character as specified by d 1 ... d n
The number of bytes for a particular character cell is 3 x n 1.
The bytes are printed down and across each cell.
Slip
c = the ASCII codes of the first ( c 1) and last ( c 2) characters respectively
c 1 = Hex 20-FF (Hex 20 is always printed as a space)
c 2 = Hex 20-FF (Hex 20 is always printed as a space)
To define only one character, use the same code for both c 1 and c 2.
d = the column data for the nth character as specified by d 1 ... d n
Each character is defined by 12 bytes (only bytes 2-11 are printed.)
Each byte is one 7-dot high column (full- or half-dot column.)
Overlapped dots are not printed
The data must contain [(
c 2 - c 1 + 1) x 12] bytes
Related Information:
See 1D 22
n (Select Memory Type Where to Save User-Defined Fonts.)