Maintenance Instructions
Lubrication
4-48
NCR 5635 Spray Currency Dispenser Service Manual
NCR - CONFIDENTIAL AND PROPRIETARY
Use pursuant to Company Instructions
Lubrication
4
This section describes the lubrication of the currency dispenser
during component replacement.
Lubricant Type
4
The following lubricants are recommended:
For No.2 General Purpose Oil any one of the following lubricants
can be used:
●
Shell Oil Co. Donax T-6
●
Mobil Oil Co. Mobil ATF 220
●
Exxon Oil Co. ATF or Esso ATF.
General Instructions
4
The following general instructions must be observed:
1
Use clean lubricants from properly labelled containers.
2
Satisfactory operation of mechanical components depends upon
proper lubrication. Follow the specific lubrication instructions
in the following paragraphs in detail.
3
Avoid excessive lubrication. Apply only that amount which will
provide a thin coating on the entire bearing area or surface,
unless otherwise specified.
4
All parts to be lubricated must be free from dust, corrosion and
metal chips.
5
Lubricate bearing areas and surfaces during assembly, unless
conditions caused by subsequent handling are detrimental (for
example, accumulation of chips, grit, and so on) to the proper
operation of the part. In those cases lubrication should be
applied after assembly.
Lubricant Type
A
No.2 General Purpose Oil
B
Synthetic Lubricating Grease (NCR Part No. 009-
0004618 = 100gm containers)
master.bk Page 48 Wednesday, March 27, 2002 9:35 AM