NCM-1550-EM30 (1550nm externally modulated optical transmitter) operating manual
- 20 -
System supports the following commands:
help
ethcfg
settrap
community
List
Restore
List internal commands of the system;
Configure the Ethernet operating parameters;
Configure the aim host IP address of the SNMP Trap;
Configure the SNMP group name;
List system default parameters or user updated parameters;
Restore the factory default values;
Specific using as follows
：
help
This command shows current application program version, program name and the
internal commands list of the system as follows:
You can also use the “help” command to show help information of other commands,
such as “help ethcfg”
，
ethcfg’s help information appears as follows:
ethcfg
This command configures the Ethernet parameters, including IP address, subnet mask
