NCI 122X, User Manual, Page: 16 / 40

11 11 11 11 11
Stop Bits Stop Bits
Stop Bits Stop Bits Stop Bits
Handshak Handshak
Handshak Handshak Handshakeeeee
Handshake is
used for serial
interface only.
PPPPParity arity arity arity arity
Columns Columns Columns Columns Columns
Invert Invert
Invert Invert
Invert
Parity can be selected only if 7 data bits are set. Choose
Odd or Even. If you choose 8 data bits, parity defaults to
None.
ST ST
ST ST
STOP BITS OP BITS
OP BITS OP BITS
OP BITS is the next parameter. Choose 1 or 2 stop bits.
1 stop bit is used for 10 bit words, 2 stop bits are used for
11 bit words.
H H
H H HANDSHAKE
ANDSHAKE
ANDSHAKE ANDSHAKE ANDSHAKE is the next parameter. Choose from the
following settings:
BUSY-LINE
BUSY-BUFFER
XON/XOFF-LINE
XON/XOFF-BUFFER
NONE
COL COL COL COL COLUMNS UMNS UMNS UMNS UMNS is the next parameter. Select the number of
characters per line (columns) for this parameter. The
choices you have are 24, 32, or 40. Below are samples of
each:
INVERT INVERT INVERT INVERT INVERT is the next parameter. Choose OK if you want
inverted text (upside down) or NEXT if you want non-
inverted text (right side up) in your printouts. Below is an
example of inverted text.
FONT FONT FONT FONT FONT is the next parameter. Choose from a 5 x 5 dot
matrix print pattern or a 5 x 8 dot matrix pattern. The
5 x 5 dot pattern produces only upper case (capital)
letters.
The last parameter is MAGNIFICA MAGNIFICA
MAGNIFICA MAGNIFICA
MAGNIFICATION TION
TION TION
TION . This refers to the
size of printed type from your printer. Your choices (with
examples) are
NONE
DOUBLE WIDE
Font Font
Font Font Font
Magnification Magnification Magnification Magnification Magnification