Install an NCE SW9-SR mobile Decoder into an P2K SW1500 switcher.
Page 10 of 14
I drilled holes in the back wall of the cab to bring these leads out. They can be connected to a 2 Wire
micro-connector to join to the keep alive capacitor in the freight car.
Should you not use the keep alive option immediately just coil the wires up and place them on the
exterior rear platform of the Switcher.
The extra length of wire for the rear light is connected to the pre-existing wires in the top of the shell
and the joins protected with heat shrink tubing and secured with Kapton tape
Now let’s see if we get the shell back on?
