6
Radio Mode
Selecting a Band
Press
BAND
once or more to select FM1
-
FM2
-
FM3
-
AM1
- AM2
.
Display shows wave band, frequency, and
preset station number if already stored.
Selecting a Station
Press the
or
tuning button to tune to
another station.
Tuning
- AUTO SEEK
Press the
or
buttons to seek the next/
previous station automatically.
- MANUAL SEEK
Press and hold the
or
buttons to enter
manual tuning mode. Press the buttons again
to move the radio frequency number up or
down one step.
Note:
• During manual seeking, if the pause be-
tween two operating steps is longer than 5
seconds, when you continue to press
the
or
buttons
, the unit will enter auto
seeking.
• During manual seeking, when you press and
hold the
or
buttons
, the unit will seek
continuously.
Preset Mode
Six numbered preset buttons store and recall
stations for each band. The stored stations
(1-6) for the current band can be viewed on
the screen.
Storing Stations
- Auto storing
1. Select a band (if needed).
2. Press
AMS
briefly to search all stations in
the band, the 6 strongest available station
will be automatically saved in the preset
button (numbers 1-6)
- Manual Storing
1. Select a band (if needed), then select a
station.
2. Press and hold a preset button (numbers
1-6) on the front panel or remote control.
3. The preset number and station is displayed
and highlighted.
Recalling a Station
1. Select a band (if needed).
2. Press a front panel or remote control
preset button (numbers 1-6) to select the
corresponding stored station.
