4
ThinSTAR 200 Installation Guide
Connect Monitor, Network, Keyboard, and
Mouse
Carefully observe these power connection instructions. Failure to follow
these instructions can cause fire or electric shock hazard.
Before connecting any cables, make sure the
NCD
Thin
STAR
200 power cord
is disconnected.
Do not connect the power cord to the
NCD
Thin
STAR
200 unless the
keyboard, mouse, monitor video, and network cords are properly connected.
Your
NCD
Thin
STAR
200 queries the monitor about its capabilities. If the
monitor is
DDC
2.0 (display data channel 2.0)-compliant, the terminal sets
the monitor to the largest desktop area and the fastest refresh rate that the
monitor supports, up to a maximum of 1024x768 pixels at 85 Hz.
If the monitor is not
DDC
2.0-compliant, your terminal sets the monitor to a
800x600 pixels desktop area with a 75 Hz refresh rate.
If you get the default 800x600 pixels at 75 Hz desktop, the monitor might
support a larger desktop and faster refresh rate. Refer to the monitor’s
documentation for the resolutions and refresh rates that the monitor
supports and then use instructions in the
NCD
Thin
STAR
200 System
Administrator’s Guide for setting the terminal to the desired resolution and
refresh rate.
Warning
PARALLEL
SERIAL
TWISTED
MONITOR
Monitor video
Keyboard
Mouse
Twisted-pair
network connection
