7
B) Hanging to the headrest.
1. Make sure power supply is disconnected before lifting up/move the
appliance.
2. Use a spiral to loosen the screws of the 2 small covers on the
bottom side of the appliance. Place the belt across the
rectangular holes, then resume the covers to their original position
and fasten the covers’ screws.
3. Plug the power cord’s DC plug to the appliance’s DC socket.
4. Hang the appliance to the headrest by using the belt.
5. Adjust the belt length and tight the belt by the buckle.
Installation finished.
*
Make sure the belt is tight enough to prevent the appliance swings.
Attention
：
：
：
：
DO NOT place the appliance in the position right above the control
and display panel to avoid over-heated, which may lead to battery
damages.
、
