NC-link NC-AP233(P), User Manual

Page: 20 / 20

19
www.nc-link.cn
8. Trouble Shooting
Q: Client can not find the SSID
A: To check wireless setting about the broadcast SSID whether enable
Q: Client can not connect to the SSID
A: Firstly, check client quantity whether reach the limit; secondly, check
client’s RSSI whether lower than the threshold limit; thirdly, check the client
whether in the deny list of setting
Q: Client can connect to SSID but can not surf the Internet
A: This mainly due to the DNS issue, check the gateway router for the DNS
setting
Q: Client network speed is low
A: Check the link rate of your connection. If it is low, change other place to
get better signal. If it is high, need to check whether has QoS in the gateway
router then do some adjustment