User Manual of 2.4G Outdoor CPE
3
DC: For Power supply, the D
C’s electronic standard is 12V/1A.
POE: This equipment can be powered over
Ethernet
, Connect CPE
’s
WAN/LAN Port with PoE adapter
’s POE port by LAN Cable (CPE’s LAN
port and WAN port support the 24V PoE.)
Refer to P2 for PoE Power and CPE configure
P2 diagram of PoE Power and CPE configure
2
nd
: CPE Start and Log in
1)
Power the CPE as P2 show
2)
Configure the Computer’s IP Address : Set the computer’s IP address as
192.168.0.X
(X is number between 2-
254), make it same as CPE’s network
segment, then set Subnet mask is
255.255.255.0,
Default gateway leave it
blank, then click
OK.
A
.: Follow P3 and P4 for wired configuration.
（
Window XP is an example
）
:
Attention
Make sure our CPE working with included Power adapter or PoE
adapter, and under right connection way, or the device will be
damaged.
