NBN Fluke CS400, Hardware Manual

Page: 56 / 66

CS400 System
Hardware Manual, Rev. 1.0, Sep 2021
56
8.7.2 Terminal
– W9 Wiring
Figure 8-10: Wiring of W9 between TSM Remote Control Box and System Connection Box
8.7.3 Internal Wiring for the Position Indicators 4, 5, 6
The internal wiring for the position indicators 4, 5, 6 does not come as factory default. If you want to run your
system with these additional position indicators then you have to implement the internal wiring by your own. The
complete wiring for the TSM Remote Control Box is given below.
Figure 8-11: Wiring for the Position Indicators 4, 5, 6
30 29 28 27 26 25 top 42 41 40 39 38 37
shield gnd Kiln
Trigger
+24 Vdc
out
shield gnd Ring 2 +24 Vdc
out
36 35 34 33 32 31 bottom 48 47 46 45 44 43
shield gnd Ring 1 +24 Vdc
out
shield gnd Ring 3 +24 Vdc
out
7 8 9 10 11 12 top 19 20 21 22 23 24
Trigger
Scanner
gnd shield +24 Vdc
out
Ring 5 gnd shield Ring 6 shield
1 2 3 4 5 6 bottom 13 14 15 16 17 18
+24 Vdc
out
gnd shield TxB TxA +24 Vdc
out
Ring 4 gnd shield +24 Vdc
out
gnd
System Connection Box TSM Remote Control Box