Installation
System Connection Box
23
4
Figure 4-3: Cable Installation
Using the 4 M5x25 screws, mount the grommet plate on the outside of the protective housing. Plug the cable
connectors into the linescanner. Connect the socket and the plug for earth ground.
Note
If installing the system in a warm environment, water-cooling may be necessary. The tubes used for water may
be run through the second grommet plate!
4.2 System Connection Box
The system connection box connects all device field cables with the customer supplied optical fiber cable. The
system connection box includes the Fiber Optic / RJ45 Ethernet Converter, the 24 VDC power supply and the
Serial/Ethernet converter for supporting the accessories (if used).
The box is supplied with quick installation line-up terminals. For more technical data, see section 9.2
Grommet plate
